Yahoo! JAPAN

This command displays the statistics and configuration information of the Routing Information Protocol (RIP) for a gateway. Example. The following example ...

The show ip rip database command displays information about routes in the Routing Information Base. The default command displays active routes and learned ...

2007/10/10 -Displays information on Routing Information Protocol (RIP) routing transactions. show ip rip database. Displays information about the IP route ...

To display RIP peer information, enter the show ip rip peer command at any context level. ... To show the RIP peer information for a specific peer with IP address ...

To display interface entry information from the Routing Information Protocol (RIP) topology table, use the show ip rip interface command in any mode. show ip ...

2002/4/19 -The show ip protocols command indicates that the proper networks are configured for RIP advertisements. You can confirm that these RIP ...

Parameters display RIP neighbor information for a specific neighbor. If a VRF is not mentioned, information for the default VRF is displayed. Examples.

2023/4/3 -The show ip route rip command displays the RIP routes that are in the routing table of the router. You can use this command to verify that the ...

show ip rip. 6.1.1 router rip. Enters the router configuration mode. The no form of the command disables RIP on ...

Correct networks, same version, no passive interfaces. Let's check if the network is in the RIP database of R2: R2#show ip rip database 2.0.0.0/8 auto-summary ...