Yahoo! JAPAN

2022/9/1 -The IDENTIFY_DEVICE_DATA structure contains the data retrieved by an ATA identify device data command (0xEC).Note The ATA port driver and ...

DESCRIPTION. This utility sends either an ATA IDENTIFY DEVICE command or an ATA IDENTIFY PACKET DEVICE command to DEVICE and outputs the response. The devices ...

The IDENTIFY DEVICE command returns a 512‑byte data structure to the host that describes device‑specific information and capabilities. The host issues the ...

The Identify Device command (command code ECH) transfers information about the drive to the host following power up. The data is organized as a single 512-byte ...

The most basic command in dealing with SATA drives is the IDENTIFY command. It is used to read the current settings of the drive under test. Define a 12-byte ...

2022/6/20 -Use [select disk #] or [sel dis #] to open specific drive, then run [detail disk] or [det dis] to show details.

2023/5/7 -This provides a common command set for systems manufacturers, system integrators, software suppliers, and suppliers of storage devices. The AT ...

2020/4/3 -The Identify Device command (command code ECH) transfers information about the drive to the host following power up. The data is organized as a ...

2017/2/27 -... media rotation rate. 222, 12, 1=Serial ATA. 06, 1=SATA Rev3.1. 05, 1=SATA Rev3.0. 04, 1=SATA Rev2.6. 03, 1=SATA Rev2.5. 243, 14, 1=SED HDD Model ...

2022/11/4 -I've narrowed the possibilities down to the IDENTIFY DEVICE command that SATA drives send after power on, since the response from this command ...