Yahoo! JAPAN

The IDENTIFY DEVICE command returns a 512‑byte data structure to the host that describes device‑specific information and capabilities. The host issues the ...

The IDENTIFY command. The most basic command in dealing with SATA drives is the IDENTIFY command. It is used to read the current settings of the drive under ...

DESCRIPTION. This utility sends either an ATA IDENTIFY DEVICE command or an ATA IDENTIFY PACKET DEVICE command to DEVICE and outputs the response. The devices ...

2022/9/1 -The IDENTIFY_DEVICE_DATA structure contains the data retrieved by an ATA identify device data command (0xEC).Note The ATA port driver and ...

2020/4/3 -Identify Device command. The Identify Device command (command code ECH) transfers information about the drive to the host following power up ...

The Identify Device command (command code ECH) transfers information about the drive to the host following power up. The data is organized as a single 512-byte ...

6日前 -This standard specifies the AT Attachment command set used to communicate between host systems and storage devices. ... identify which, if any, ...

2022/11/4 -I've narrowed the possibilities down to the IDENTIFY DEVICE command that SATA drives send after power on, since the response from this command ...

This utility sends either an ATA IDENTIFY DEVICE command or an ATA IDENTIFY PACKET DEVICE command to DEVICE and outputs the response. ... -p, --packet send an ATA ...

2011/6/30 -I figure out what devices exist and whether they're ATAPI, SATA, or PATA. Then I select the ATAPI device, wait 400ns, and zero ports 0x172 ...