日本語のみで絞り込む
2017/9/27 -AutoQoS can be enabled with the trust keyword of the auto discovery qos command when the data collection phase in enabled. Note. Some releases ...
2010/7/28 -Router# show auto discovery qos. Serial2/1.1 AutoQoS Discovery enabled for trusted DSCP Discovery up time: 2 hours, 42 minutes AutoQoS Class ...
The command auto discovery qos trust is used on the interface. Since all VoIP packets from the Avaya S8710 Servers and the Avaya. IP Telephones are pre-marked ...
2004/12/23 -The auto qos voip command comes with two optional parameters, trust and fr-atm. The trust parameter tells AutoQoS VoIP to trust the incoming ...
On a Cisco switch that employs QoS, the auto qos trust command generates a set of predefined QoS parameters for all trusted interfaces within the QoS domain.
2019/5/6 -You want to use "auto qos voip cisco-phone" on access ports so that ONLY IP phones are trusted. All other devices will have their QoS values ...
auto qos trust {cos | dscp}: This option configures the port to statically trust either CoS or DSCP. If neither CoS nor DSCP is explicitly specified, the ...
2021/2/8 -Re: qos trust dscp. Hello, I believe this is the command under interface : qos trust <auto | dot1p | dscp | none> Thanks! Note: While I am an ...
This chapter describes how to configure quality of service (QoS) by using automatic-QoS (auto-QoS) commands or by using standard QoS commands.
2017/7/19 -Auto-QoS uses AF (Assured Forwarding) values for DSCP marking. Enabling Auto-QoS on the access switch. Global configuration mls qos (Activates ...