Yahoo! JAPAN

The HELLO protocol uses a distance-vector algorithm, like the Routing Information Protocol (RIP) and the Gateway-to-Gateway Protocol (GGP). What's interesting ...

It's 5 seconds for LAN interfaces and 60 seconds for slow (WAN) interfaces. The holddown timer is 3x the hello timer. Avatar for tsirgogik tsirgogik ...

ip ospf hello-interval ... Sets the time interval between OSPF hello packets for the OSPF interface. The no form of this command sets the time interval OSPF hello ...

OSPF uses the hello and dead interval to check if a remote neighbor is still alive. This lesson explains how to tune these timers.

2013/1/29 -Configures the hello interval for the EIGRP routing process designated by an autonomous system number. ip next-hop-self eigrp. To enable the ...

A HELLO packet is a special data packet (message) that is sent out periodically from a router to establish and confirm network adjacency relationships to other ...

2020/9/12 -ip pim hello-iinterval specifies when PIM hellos are sent to keep up a PIM adjacency. Default value should be 30 seconds. ip pim query ...

To configure your Windows NT computer to participate in sharing routing updates with other computers on the network, you need to enable IP forwarding. This is ...

2023/8/3 -The dead interval specifies the length of time, in seconds, that the routing device waits before declaring that a neighbor is unavailable. This ...

Configures the hello interval, which is the length of time between the transmission of hello packets that this interface sends to neighbor routers.