約105,000件1ページ目

日本語のみで絞り込む

Logical block addressing (LBA) is a common scheme used for specifying the location of blocks of data stored on computer storage devices.

The most basic command in dealing with SATA drives is the IDENTIFY command. It is used to read the current settings of the drive under test. Define a 12-byte ...

2010/12/11 -What's the best way to issue disk commands (read k blocks from lba n etc.) to a SATA disk? The choice of OS does not matter. I also need to be able to issue ...

Identify Device command. The Identify Device command (command code ECH) transfers information about the drive to the host following power up. The data is ...

2023/9/16 -The above error means that the SMART self-test encountered an UNCorrectable error at Logical Block Address 0x00041800 (hexadecimal representation) or 268288 ( ...

2015/4/29 -The LBA are the numbers reported by the Seagate SeaTools. They report bad LBA numbers. I want to know which files, if any, are located on these LBA.

A.CrystalDiskInfoも万能ではないので、対応できないHDDはあるもんです。 切り分けという意味では CrystalDiskMarkとか使ってHDD単体の速度測定してみたらどうかな ...

A.今のところ、特に問題無いようです。 一般的にHDDの平均寿命は、5~7年程度と言われています。

2022/9/1 -The IDENTIFY_DEVICE_DATA structure contains the data retrieved by an ATA identify device data command (0xEC).

The drive can also report what its native maximum Highest LBA (Logical Block Address) is via the DCO Identify data. Maximum LBA vs Highest Number of Sectors.

Serial ATA is an interconnect technology designed to replace parallel ATA technology. It is used to connect hard drives, optical drives, removable magnetic ...

2024/5/7 -This is a draft proposed American National Standard of Accredited Standards Committee INCITS. As such this is not a completed standard.