Yahoo! JAPAN

Seagate and Maxtor-brand ATA drives ship directly from the factory configured as a Master device. If the drive is going to be installed as the only device on ...

Maxtor hard drives can be set as either a Master or a Slave device. There are no other jumpers to set when the Maxtor drive is installed on the same ribbon ...

2002/9/5 -シングルヘッド/ディスクを使用した廉価版HDDとして、7,200rpmの「DiamondMax Plus 8」と、5,400rpm対応の「Fireball 3」も発表された。 ともに厚さ17.5mm ...

2008/5/5 -Ok, I got into working with the drive today. All these screenshots were taken with the drive set to master mode on IDE 2. Seems to be the same ...

DiamondMax 8s 6E040T0 Maxtor 40GB 7200rpm 3.5インチ SATA 【中古】. 10003565. 4,980円(税込). SOLD OUT. 返品について · 特定商取引法に基づく表記 ...

2020/9/5 -Hey folks, I'm doing some data recovery / backing up my ancient hard drives, and I've got one very stubborn Maxtor DiamondMax Plus 8.

2005/5/13 -DiamondMax Plus 8 model number 6K040L0 meets ... configured as Master or Slave either by the CS or DS jumpers. ... 4-8. To connect the drive to ...

2011/4/7 -The DriveWire instructions direct that the IDE drive should be set to "Master ", which it is. However, the drive doesn't appear in the My ...

2021/1/5 -Date of manufacture: 08/26/03. The drive is a Maxtor DiamondMax Plus 8 40GB ATA/133 ... I would just leave jumper on master. http://www.p-dd.com ...

2005/2/24 -A most common error is to put a slave drive on without checking the jumper settings on the master drive. Don't mix Cable Select and Master/slave ...