Yahoo! JAPAN

Logical block addressing (LBA) is a common scheme used for specifying the location of blocks of data stored on computer storage devices, generally secondary ...

The disk device plugged into specified SATA device port does not support LBA addressing and cannot be used. Cannot identify SATA device at port X - device is ...

The Identify Device command (command code ECH) transfers information about the drive to the host following power up. The data is organized as a single 512-byte ...

The drive can also report what its native maximum Highest LBA (Logical Block Address) is via the DCO Identify data. Maximum LBA vs Highest Number of Sectors.

2015/4/29 -I'm running Windows 7, 64-bit platform. The drive is connected internally via SATA interface. Due to the size of the drive, I'm having problems ...

2023/1/31 -If a normal ATA drive should ever happen to abort an IDENTIFY command, the values in those two ports will be 0. A SATA device will report 0x3c, ...

2010/12/11 -What's the best way to issue disk commands (read k blocks from lba n etc.) to a SATA disk? The choice of OS does not matter. I also need to ...

This utility sends either an ATA IDENTIFY DEVICE command or an ATA IDENTIFY PACKET DEVICE command to DEVICE and outputs the response. ... When set a 48 bit LBA ...

5日前 -This is a draft proposed American National Standard of Accredited Standards Committee INCITS. As such this is not a completed standard.

2023/9/16 -This option will format and delete the partition, forcing the disk to identify any bad sectors and remap them. CLI Approach: Refer to this ...