Yahoo! JAPAN

2023/11/28 -Use the show ip igmp interface command to check the IGMP version of the interface. Note: Remember that a router configured with IGMP version ...

This command displays information about the Internet Group Management Protocol (IGMP) group table. Syntax. Parameter. Description. maddr <multicast-addr>.

To display the Internet Group Management Protocol (IGMP) snooping configuration of a device, use the show ip igmp snooping command in the privileged EXEC mode.

Global command listing IGMP status for all VLANs configured in the switch: VLAN ID (VID) and name. Querier address. Active group addresses per VLAN. Number of ...

Displays the status of IGMP multicast groups on a device. Syntax. show ip igmp ... The example displays information for all IGMP multicast groups. device# show ip ...

show ip igmp. show ... The following example displays the IGMP interface table for all VLANs on Mobility Conductor. (host) [mynode] #show ip igmp interface vlan 2.

2023/5/23 -Related Commands. show ip igmp snooping mrouter ; Notes. The multicast router port can be created only if IGMP snooping is enabled both globally ...

Multicast IGMP Report messages can be filtered on Cisco IOS routers and switches. This lesson explains how to do it.

Use the show ip igmp snooping command to display IGMP snooping information, display multicast router port related information for the specified VLAN, or to ...

Specifies tracking information on interfaces that have tracking enabled. Modes. Privileged EXEC mode. Command Output. The show ip multicast group command ...