日本語のみで絞り込む
2007/3/1 -This document illustrates how to add message authentication to your Enhanced Interior Gateway Routing Protocol (EIGRP) routers and protect ...
EIGRP only supports Message Digest 5 (MD5) authentication ... Syntax: ip authentication key-chain eigrp <as-number> <key-chain> ... Syntax: ip authentication mode ...
Configure a key ID under the key-chain. Specify a password for the key ID. Optional: specify accept and expire lifetime for the key. Let's use two routers ...
2006/12/25 -Step 2 Specify MD5 authentication for EIGRP packets using the ip authentication mode eigrp autonomous-system md5 interface configuration command ...
2018/10/7 -There are two ways to authenticate EIGRP messages; MD5, and more recently hmac-sha-256 (only available in named mode, as of IOS 15.1(2)S and ...
2016/7/11 -EIGRP supports SHA authentication since IOS 15.x. This lesson explains how to configure everything.
2018/1/5 -In this tutorial we will learn how to configure EIGRP Authentication on cisco router using cisco packet tracer.This lab is based on EIGRP ...
EIGRP message authentication ensures that routers only accept routing messages from other routers that know the same pre-shared key.
2021/3/26 -Configure all routing protocol authentications to encrypt the authentication key. BGP Example: SW1(config)#router bgp nn. SW1(config-switch)# ...
This was achieved by reducing the available number of routes in a RIP message from 25 to 24 and including the plain text password in the first route entry.