2024/5/18 -The LAC functions at the originating point of the tunnel where it accepts connections from clients. It initiates the tunnel with an LNS, which is positioned at ...
2024/9/12 -The LAC functions as a PPPoE server to authenticate call connecting requests from remote users, and initiates L2TP connections to the LNS based on the user ...
2024/7/26 -The VPN user sends a packet to the LAC through the LAN. The LAC encapsulates the packet and then forwards the packet through the L2TP tunnel to the LNS. Figure ...
2024/5/23 -A router that lies between a LAC and an LNS is configured as an L2TP tunnel switch (LTS)—sometimes referred to simply as a tunnel switch or a tunnel switching ...
2024/9/9 -# Run the display l2tp tunnel command on the LAC or LNS. You can find ... The LAC and LNS must use the same user name and password. When you configure ...
2024/9/1 -1. Configure the LAC and LNS separately. 2. Enable tunnel authentication, and set the tunnel authentication key.
2024/7/25 -# Configure the local tunnel name as LAC, and specify the IP address of the tunnel peer (LNS). [LAC-l2tp1] tunnel name LAC [LAC-l2tp1] lns-ip 3.3.3.2.
2024/10/29 -L2TP Access Concentrator (LAC): Acts as the entry point for data from remote devices. L2TP Network Server (LNS): The endpoint for the L2TP tunnel, terminating ...
2024/5/12 -The LAC accepts the tunnel, assigns a network slot, and the LNS generates a virtual PPP interface for data exchange. Upon receipt, the LNS removes encapsulation ...
2024/9/2 -This can be used to guide an LAC based on LNS policy, for instance, the existence of multilink PPP bundles. 8, Session or tunnel was shutdown due to receipt of ...