動画検索
関連広告
検索結果
We'Ve Chosen To Route Our Two Airbags Together into One Fitting at the Very End but if You Wanted that Independent Control It Does Come with All the Pieces Necessary To Do that Just for Our Jeep Today There's Really Not That Much Reason to because Chances Are We'Re Not Going To Have Really Offset Loads It's all Mostly Going To Be on the Hitch Very Centered
Got Our One Side Installed
.and Once You'Ve Found the Halfway Point Get a Nice Clean Cut down the Middle To Separate It into Two Halves Then We Can Get this a Little Bit Pre-Routed Up under the Spring
Be Careful because As Soon as You Take this off It's Going To Start Filling Up with Air So I'M Going To Try To Keep It Held Down as Best I Can Take the Cap Off
So I'Ll Make One Final Cut before We Attach It I Am Going To Leave Myself a Little Bit of Slack Here Just So I Have some Room To Play with Right about There We'Ll Attach another One of those Clamps before We Get this Pushed into Place Just like We Have Before and We Can Get this Attached to the Back Side of Our Fitting Now One Final Thing I'M Going To Do Here You'Ll Notice that on Our Hitch We'Ve Got a Little Bit of a Lift Right Here That We'Re Bending Around
With Everything Connected and Hooked Up We'Re Ready To Test Out the Airbags and Make Sure that There's no Leaks It's Recommended that You Fill the Bags up to 20 Psi for Testing and Then Spray All the Connection Points Down with Soapy Water To Make Sure that There's no Bubbling and no Leaks Foreign once You Verify that There Aren't any Leaks in the System You'Ve Done with the Installation Process Overall