動画検索
関連検索ワード
- pvcシート ポーチ
- で検索
関連広告
検索結果
For the base flange, measure at least 2 past the outside diameter of the pipe. Measure the distance between the marks
The PVC Flashing should be cut at least this length in each direction
Fold the PVC Flashing in half and mark the diameter of the pipe
Apply heat to the edge of the inner circle previously cut, then stretch the flashing along the heated area. This will allow the PVC Flashing to turn up the pipe.
Weld the bottom flange of the PVC Flashing to the deck so that it is held in place
Overlap the top flange at least 2 , then weld the top flange to the bottom flange
For the vertical flange, measure the circumference of the pipe. Then measure and cut a section of PVC Flashing at least 2 longer than the circumference
Weld the base of the vertical flange to the deck.
Finish welding any areas of the vertical overlap and the base of the PVC Flashing.
Once the weld area is completely cooled, check all splices for voids and cold-welds with a seam probe. Make any needed repairs.
関連検索ワード
- pvcシート ポーチ
- で検索