動画検索
関連広告
検索結果
This video will show you how to correctly prepare for painting any aftermarket replacement part.
Start by roughly sanding the black primer using the 320-grit sandpaper.
Repeat the process for the other side.
Wipe off any excess gravel guard and drips with a shop rag and let it dry.
Repeat the process and spray the outside with sealer primer too.
Finish sanding using the abrasive pad one last time.
Wash it with any good surface cleaner.
Spray paint any area you wont be able to paint once the fender is on the car and let it dry.
Apply another coat of paint. Let dry.
Install the fender on the vehicle and prepare surrounding areas to receive paint.
17.5M posts. Discover videos related to Certifit Auto Body Parts on TikTok. See more videos about Full Body Circuit Workout.
TikTok-yifude_auto_parts
2023/07/09By using the mixing tip, on a mixing plate, poured the glue and the activator evenly to make sure both products are well mix.
Using a plastic spreader, spread the glue evenly over the tear.
Make sure you have enough glue the cover the tear, if not immediately apply second coat for proper build
Prepare a plastic repair reinforcing tape by cutting to shape. Next, apply the precut reinforcing tape over the repair
Immediately apply another coat reinforcing tape
Allow to dry according to the setting time of the manufacturer (refer to the technical data sheet or directly to the glue tube, work time) before handling
For a double-sided repair, repeat the same steps except applying the reinforcement tape on the outside
Apply a thin layer of glue on the entire tear
After, wait according to the manufacturer's references (sand time on average 15-20 minutes) before sanding to P100 / P120
Once well sanded, finish with finishing putty or directly apply primer