動画検索
関連広告
検索結果
How to Configuration 2 WAN and 2 LAN separate, same MikroTik router
Login to MikroTik use WinBox
Reset Configuration - No Default Configuration
Set interface name
Set DHCP Client for WAN (ether1-WAN1 and ether2-WAN2)
Set LAN (ether4-LAN1 and ether5-LAN2)
Now LAN1 and LAN2 access to the internet, but we are not separate
Configure Mark Routing
Configure Static Route
Check LAN1 go to WAN1
Check LAN2 go to WAN2
Allow ping gateway
Rename the INTERFACES...
66 Configure the LAN/WAN/WANZ IP ADDRESSES...
Create a DHCP SERVER on the interface LAN...
Create ADDRESS LISTS for the LAN and the 2 WAN...
Configure NAT - MASQUERADE
Create MANGLE - ACCEPT RULE
Create ROUTING MARKS...
Add route for marked routes...
Add DEFAULT/FAILOVER routes..
Testing LOAD BALANCE...
Intro
Device & Port Overview
Configure LAN port as WAN port
Install mwan3 packages
Configure the 2nd WAN interface (PPPoE with VLAN)
Configure specific metric for each Interface
Configure mwan3 on LuCI - Interfaces
Configure mwan3 on LuCI - Members
Configure mwan3 on LuCI - Policies
Configure mwan3 on LuCI - Rules
Troubleshoot mwan3 - Rename an interface
Test with bmon
Configure Multi-WAN Load Balancing 2 PPPoE with VLAN
Configure Multi-WAN on OpenWRT 19.07