動画検索
関連広告
検索結果
Installation Video 2 of 3 Camera Installation and Wire Harness Routing
At the rear of the vehicle, remove all of the plastic fasteners attaching the cloth trunk liner to the trunk lid.
On the underside of the trunk lid, remove the six nuts from the studs attaching the license plate lamp shroud to the trunk.
Using a pair of pliers, gently squeeze the plastic alignment stud used to align the license plate lamp shroud to the trunk lid in order to release the shroud.
Once the alignment stud has been loosened, lower the trunk lid and gently lift away the license plate lamp shroud.
Reattach the six previously removed nuts to the studs of the license plate lamp shroud and then replace the trunk lid liner using the previously removed plastic clips.
Route the camera harness underneath the scuff plate and use the supplied cable ties to securely attach the harness to the factory wire loom.
Remove the scuff plate from the front doorsill as well and route the harness underneath and then behind the driver's side dashboard to be connected to the rear of the radio.
Locate the supplied video interface t-harness and press it firmly into place on the backside of the radio.
Proceed to Video 3 of 3 Dashboard Reassembly and Camera Testing
Video 1 of 3 Dashboard and Radio Removal
Begin your installation by removing the negative cable from the vehicle's battery.
From the interior of the vehicle, remove the lower dashboard trim panels and the upper air conditioning vents.
Next, gently pry the upper dashboard housing from the radio's trim bezel using either an automotive trim tool or your hands.
After the upper dashboard housing has been disconnected, remove the two upper and two lower radio mounting screws from the dashboard
Once the four radio mounting screws have been removed, gently lift the radio from the dashboard in order to gain access to the factory wiring harnesses on the backside.
Lean the radio forward and disconnect the individual factory wiring harnesses on the rear side.
Lift the radio completely away from the dashboard and set it aside in a safe location.