Attach the fans to the radiator

Install the back plate on to the back of the motherboard

Place position plate on stand-offs and use set screws to fix the plate

Remove the protection film from the cold-plate

Connect the pump power connector to the motherboard

Connect the connector to the motherboard

Connect the RGB sync cable 3-Pin connector to the motherboard

Connect the RGB Sync cable to the adapter and to the motherboard RGB header

Use RGB sync cable to connect the waterblock and fans

Use RGB Controller power cable (SATA) to connect the RGB Control Box and PC power supply SATA connector

ENSURE THE FLAT MOUTH DIRECTION OF SCREW HEAD IS PARALLEL WITH THE ASSIGNED HOLE OF THE SOCKET

BACK PLATE MARKED INTEL SHOULD BACK TO THE MOTHERBOARD

INSERT THE INTEL LGA1700 SCREWS CLOSE FIT THE HOLES ON THE BACK PLATE

THEN USE THE WASHERS TO FIX THE INTEL LGA1700 SCREWS.

INSTALL THE BACK PLATE ON THE BACK OF THE MOTHERBOARD

FIX THE BACK PLATE WITH STAND OFF

REPLACE THE INTEL CLIP

APPLY THE THERMAL GREASE EVENLY ON THE CPU SURFACE

PLACE THE PUMP ON THE CPU.

AND TIGHTEN THE SPRING SCREWS UNTIL ALL FOUR CORNERS ARE SECURED.

Connect power cable to COOLERGENIE's power cable port

Connect power cable to COOLERGENIE port of the power supply

Connect PWM signal cable to COOLERGENIE's M/B PWM port

Connect PWM signal cable to CPU fan connector of MB

Connect the CPU cooler fan to COOLERGENIE's cooler fan port

Connect the case fan(s) to COOLERGENIE's case fan port(s)

Enter the BIOS to set the CPU fan control to the PWM mode

Use the magnetic strips or Velcro to fasten the COOLERGENIE

Select your preferred Semi-fanless mode

Slick Rgb

Quiet

Lack of Light on the Exhaust

Performance Is Satisfactory

Enermax's Reactions

Basics & Shipping

Opening the Coolers

External Corrosion

Gasket Failure

Measuring Fluid Content

Coolant Color

Weighing the Units

Our View on RMA Fees

Closing Thoughts

Attach the fan to the radiator

Ensure the flat mouth direction of screw head is parallel with the assigned hole of the socket

Use the washers to fix the position screws

Install the back plate on the back of the motherboard

Fasten the Intel LGA 2011 screws to the motherboard

Apply the thermal grease on the CPU surface

Tighten the spring screws until all four corners are secured

Connect the PWM cable to the motherboard

Connect the RGB sync cable to the fan RGB connector

Connect the fan RGB connector to the motherboard

Intro

CDKDEALS

Specs

Install guide

Gaming thermals

Cinebench R23

Blender

Conclusion

Insert the position screws into the proper holes on the back plate

Install the back plate on to the back of the motherboard.

Put the stand-of's into the back plate screws

Fasten the Intel LGA 2011 screws to the motherboard

Remove the fan before installing the heat sink

Apply the thermal grease onto the CPU surface

Place the color on the CPU

Secure the cooler on the CPU by fong the screws on the four comers of the mount.

Attach the fan to the cooler. Connect the lanapin header to the CPU fan power socket on the motherboard.

Use the fan speed reduction adaptor to reduce the fan speeds to 600-1800 RPM for quiter operation

Intro

Hardware Hound Intro

Installation

Lighting Demo

RGB Lighting Options

RGB Lighting Effects

Performance

Is it worth the cost?

Final Thoughts

Outro

AMD AM5 INSTALLATION GUIDE

AMD mounting bracket pre-installed

Apply the thermal grease to the CPU surface

Place the cooler on the CPU

Clasp the hooks of the AMD mounting bracket onto the plastic notch at the top end of the AMD CPU socket, as illustrated

Attaching the fan to the cooler

Connect the fan's 4-pin header to the CPU fan power socket on the motherboard

INTEL LGA1700 INSTALLATION GUIDE

Insert the clips into the proper holes on the Intel mounting bracket

Apply the thermal grease to the CPU surface

Press the push-pins into the clips and ensure the Intel mounting bracket is safely installed on the motherboard

AMD mounting bracket pre-installed

Place the cooler on the CPU

Clasp the hooks of the AMD mounting bracket onto the notch on the underside of the Intel mounting bracket as illustrated

Attaching the fan to the cooler

Another LGA1700 bracket installation method

Insert the clips into the proper holes on the Intel mounting bracket

Clasp the hooks of the AMD mounting bracket onto the notch on the underside of the Intel mounting bracket, as illustrated

Apply the thermal grease to the CPU surface

Place the cooler on the CPU

Press the push-pins into the clips and ensure the Intel mounting bracket is safely installed on the motherboard

Attaching the fan to the cooler

Connect the fan's 4-pin header to the CPU fan power socket on the motherboard