動画検索
関連広告
検索結果
Peel off the first release handle and place dressing centrally On the wound. The soft port should be uppermost from the wound if possible and not over the wound
Remove the remaining handles and smooth dressing around the wound to prevent creasing
Apply the fixation strips all around the dressing border as they help maintain the seal Place each strip so that it overlaps the dressing by approximately 1cm
Remove the top carrier of the strip after each one is applied
Ensure tubing is not twisted or trapped between clothing
Remove the remaining backing and smooth dressing edges to secure to periwound skin.
Connect the dressing port lubing to pump and twist
Once a seal is confirmed, the dressing will be firm to the louch & the green OK light flashing on the pump
Then, seal dressing with the supplied adhesive retention strips around all edges. Place each strip so that it overlaps the dressing
Ensure tubing is not twisted or trapped between clothing
Press the orange button on the PICO pump and disconnect the dressing from the pump. If you are using the extension tubing do not discard as it can be used for dressing changes.
The retention strips should be laterally stretched away from the skin to break the seal and the dressing lifted at one corner and peeled back until it has been fully removed.
求める情報が見つからない場合は、キーワードや指定した条件を変えてみてください。