動画検索
関連広告
検索結果
Heat up the tube so that the it can be seperated from the inner tube
Make sure to remember the orientation of the parts during disassembly
Difference between ultrasonic cleaned and blasted
Cerakote H-serie Graphite Black
Blasted and ready for primer
New fork seals
Place the seal deep enough for the retaining clip to engage in the notch
Tape off the socket so you don't damage the top nut
Additional risers for a wide bar and spacers to match the Ducati legs
Extended the OEM wheel axle so that it fits in the Ducati legs
Full Bing carb rebuild and Cerakote H-serie Graphite black treatment
First step is complete disassembly of the carb
All striped down and ready for the ultrasonic cleaner
Masked off and ready for blasting
Difference between ultrasonic cleaned and blasted
Give the parts a couple of hours soak in acetone
All vaped out and ready for the Cerakote
Fasten the new bolts for securing the butterfly valve with some Loctite
In preparation for the Cerakote, the parts must be blasted with aluminum oxide for the correct adhesion
Let the parts soak in acetone for a few hours
All parts ready for assembly
Heat the cover so that it can be easily pressed over the bearing
New piston rings installed
Apply a small coat of oil to the skirt of the piston and pushrod seals
Make sure the locking of the piston pin is fully seated in the notch
Apply a small amount of copper paste