動画検索
関連広告
検索結果
Lay your PVC nuts on top of your plastic container to check that it is the right size.
Use the template you have just cut to mark the other container and repeat the whole process.
Cut a small piece of elastic and glue in between both parts.
To create a small gouge, fill a plumbing nut with cardboard. Fill it up with hot glue to level it and leave it on the side to set.
Place your gauge into position and super glue some wire around it to make it look like if it was connected.
To make the goggles more comfortable, cut some old cables and empty them. Glue the plastic sleeves all around the side shields.
To create the glass you can use some blue or green plastic sheet or use some glass paint onto a clear plastic container. Leave it to dry
Add other colours to create some contrast. I went with 3 shades onto the wires.
Dry brush a very small amout of silver to create some highlights.
Cut your glasses until they fit nicely into your goggles Superglue them.
Remove glass and lens from the goggles though, before you paint. They should just screw out
All the random nuts and bolts I could find were painted silver
Once all your pieces are glued on we can then start adding the black paint.
Using your finger rub the black acrylic paint over the gun and spread it out to create that dirty look
Concentrate the black around areas like the handle that would normally be dirtier anyway
For the goggles I hot glued on some spikey studs around the lens, added some chain down the side and a hinge in the middle
I also rubbed these over with the black acrylic paint to 'dirty' them up
I also took off the head strap they came with and replaced it with a piece of a thin leather belt
I glued a couple of studs to the sides and some small nuts on top of the air filters, be creative add whatever you can find