動画検索
関連広告
検索結果
This example is on damage to a hard wood floor.
Using the applicator provided remove all loose parts of damaged wood...
and use the red end of the applicator to smooth out the rough edges of the damaged area.
For best results use a minimum of 3 colours of hardwax for the repair you can also indude transparent hardwax if you wish.
Remove the cap of the battery heating tool.
Excess wax can be cleaned out of the applicator with the red cap by using its edge to remove the waste from the serrated edges.
Add darker colours of hard wax to the filled damaged area, if required, to correct the base colour
Remove the scotch brite pad from the interior of the applicator and gently rub over the repaired area to remove any last remains of excess filler and dull the wax.
Use the dear lacquer pen over the repaired area to match the sheen level of the surface. Shake the pen well for a minimum of 15 seconds.
To make any final adjustments to sheen, you can use the sanding and polishing cloth. Use the white side to reduce the sheen and the green side for a glossier finish.
These materials are included in the set.
Choose matching colours. Use colour shades from light to dark.
Hold down the blue button for 10 seconds. The melter heats up.
Should the filler start smoking, release the "ON" button. The tip cools down slowly.
Slightly overfill the damaged area.
Clean the planer grooves
Remove final filler residue with sandpaper. Sand in the direction of the grain using light pressure.
Seal area with the AQUA Clear Lacquer Brush Pen. Shake pen vigorously.
Squeeze again. Lacquer flows into the brush tip. Slightly dab brush tip on the cloth and seal the repaired area.
Use the Sanding and Polishing doth to adjust the sheen. The white side reduces, the green side polishes.