動画検索
関連広告
検索結果
Intro
What is this video about?
Key Steps to using BIOS FlashBack
Downloading the latest BIOS
Unzipping and renaming the BIOS file
Official instructions from ASUS
Connecting the necessary power supply power cables
Turning on the power supply switch
Plugging in the USB drive to the correct port
Pressing the BIOS FlashBack button
Watching the BIOS flash LED
Frequently asked questions
Common reasons that this does not work
Outro
Bonus Chorizo footage!
BIOS Flash Button Tutorial Intro
What You'll Need
Creating the USB stick to flash the BIOS
Formatting the USB stick
Downloading the BIOS from us.msi.com
Renaming the BIOS file to MSI.ROM
Copy the renamed file to the USB stick
Setting up the hardware to flash the BIOS
Use the marked USB Port to flash BIOS
Using the Flash BIOS Button
To start with, I will first look at what the BIOS is. Essentially, the BIOS is a microchip found on the motherboard. BIOS is essentially what is referred to as firmware. Firmware contains basic low-level software that controls the hardware in the device it is installed in. In the case of computers, the BIOS contains basic input and output software which is used to communicate with hardware. When the computer is first switched on, the BIOS software is used to test the hardware within and connected to the computer. Once complete, the software in the BIOS is used to access the hardware.
To start with, I will first look at what happens when the power button is pressed on a computer. When the power button is pressed, a circuit is closed which causes a test to be preformed of the computer’s power supply. If there is a problem with the power supply, usually there will be no power output at all and the computer will not start.
The BIOS is essentially a microchip on the motherboard. This is also often referred to as firmware. Older BIOS chips use Electrically Erasable Programming Read-Only memory called EEPROM, whereas modern BIOS uses flash RAM. This allows the code in the BIOS to be updated, but the code on the BIOS cannot be directly run from the chip itself.
The next step is that the BIOS performs a number of tests. These tests are referred to as POST or power- on self-test. These are a number of quick tests to check everything appears to be working. There may still be hardware faults, but the POST tests should pick up any basic problems.
Put the BIOS into FAT32 USB pendrive
Change the BIOS filename to MSI.ROM
Plug in power supply to your motherboard
Check Flash BIOS Button port location in manual
Plug the USB pendrive into Flash BIOS Button port
Press Flash BIOS Button
Red light will start flashing to indicate BIOS update is in process
Red light will stop flashing to indicate Flash BIOS Button process is finished
Flash BIOS Button success!
Intro and Test Goals
System Base Specs and Motherboard Overview
Bios first setup and update
Bios overview, what do you really need to know
First VRM Test and Auto voltage issue
World of Warcraft Test and Gameplay at XMP
VRM Test done right (manual vcore)
World of Warcraft Test and Gameplay at 3600MHz C14 Gear 1
Final thoughts and upcoming projects
Intro
Why would you want to do this?
Key Steps to using BIOS Flashback
Downloading the latest BIOS
Unzipping and renaming the BIOS file
Preparing the USB drive
Connecting the necessary power supply power cables
Plugging in the USB drive to the correct port
Pressing the flash BIOS button
When is it done?
What do I do after this is done?
Common mistakes
Frequently asked questions
Outro
Bonus Chorizo footage!
Before I start, I will first look at how the BIOS and the CMOS work. This will give you a better understanding of what happens when the settings are cleared. In this video, I will only refer to BIOS, but if you have a computer with a UEFI chip on it, the principal is the same and the procedures are also the same.
1_Bullet12_Jumper
If you have trouble locating the jumper, refer to the motherboard manual for its location. It is usually located next to the BIOS chip. There will usually be some printed text next to it help you find it. Usually it will have the letters CLRTC which stand for Clear Real Time Clock. Essentially you reset all the settings and also reset the real time clock. If you have a computer that you keep having to set the time and date on, chances are the battery on the motherboard is dead.
First, I will start the computer and press the delete key to enter the setup. Once in the setup, notice that the date is currently set correctly. Once I reset the CMOS setting, we will notice that the time and date will not be correct.